Adesivi niner MTB: adesivi in vinile cut per telaio, forcella, ruote e casco
Cut vinyl decals for frame, fork, wheels or helmet. Resistant to sweat, sunscreen, mud and pressure washing typical of cycling. Compatible with aluminium and carbon fibre frames. It's not just any image vectorised quickly. Each design is vectorised specifically for cut vinyl. Once applied, it looks painted or screen-printed on your wall.
Proprietà e durabilità degli adesivi
Up to 20 years indoors without losing colour or adhesion. Outdoors: 5 years with direct sun exposure, much longer in shaded areas. The vinyl adheres correctly on lacquered carbon fibre, anodised aluminium or painted frames with smooth finish. Yes, the vinyl is not affected by sweat or sunscreen in normal use. If contact is very frequent and prolonged (road handlebar with long riding hours), wipe with a soft cloth and water after each ride to remove residue. To extend vinyl life: tilt the lance and don't aim at 90° against the edges.
Preparazione e strumenti inclusi
White backing that protects the adhesive. Small extra decals so you can practise the technique before the final one. The technique varies depending on the size of your decal. Position the decal and hold it with masking tape on the surface. Peel the decal off the white paper. If any part stays on the paper, rub with the squeegee until it transfers to the transparent film. Press with the squeegee from the centre outwards. Avoid bubbles. Rub the entire surface well with the squeegee so the decal sticks. Remove the transparent film slowly. Check that no element has stayed stuck to it. Done. Enjoy it!
Position the decal and tape it with masking tape. Place a horizontal strip in the centre that will act as a hinge. Remove the top tape and peel off the silicone backing of the upper half carefully. Cut the white backing across the centre. This way you can apply the upper half while the lower one stays protected. Press with the squeegee from the centre to the edges on the upper half. Remove the remaining white backing from the lower half. Press with the squeegee from the centre to the edges on the lower half. Remove the transparent film at 180°, not perpendicular. Slowly. Done. Enjoy it! The decal is not reusable.
Applicazione su superfici specifiche e manutenzione
Before applying, clean the area with water and neutral soap and let dry 24h. On carbon frames with cracks, dents or discolouration, do not apply without repairing the surface first. The vinyl adheres correctly on lacquered carbon fibre, anodised aluminium or painted frames with smooth finish. For maintenance, soft cloth with water and neutral soap is sufficient. To remove, apply gentle heat with a hairdryer at low power and peel slowly. On well-painted carbon or aluminium frames, removal is clean.
Uso pratico e considerazioni di design
«Add your family name, your race number, your club name or a cyclist's quote in cut vinyl.» Practise first with the test decals. Designed by TeleAdhesivo, not generic. Not just any image vectorised quickly; each design is vectorised specifically for cut vinyl. The vinyl does not affect the movement of the spring or rebounds; it adapts to normal movement of the fork but should not be applied on the moving area of the seal or on the sliding tube, where rubbing against the dust seal during compression will peel off any adhesive. The relief prevents uniform adhesion and reduces durability.
- Where can you stick it? On the frame, fork, wheels or helmet, provided the surface is clean and smooth.
- What’s in your order? Cut decal, transfer film, silicone backing, practice decals and printed instructions.
Tempi di consegna e disponibilità
5-7 days in UK and Ireland. 3-7 days in the rest of Europe depending on country. Yes, the vinyl adheres correctly and is designed for easy handling during installation.
Note sulla compatibilità e condizioni di superficie
Yes, on the fixed area of the fork (the polished or lacquered tubes). The vinyls adapt to the normal movement of the spring and rebounds. Do not apply on the moving area of the seal or on the sliding tube: the rubbing against the dust seal during compression will peel off any adhesive. The vinyl is compatible with lacquered carbon fibre, anodised aluminium or painted frames with smooth finish.
Adesivi niner MTB sono una scelta ideale per personalizzare e proteggere il tuo stile di guida, combinando design vettoriale su vinile resistente e applicazione pratica, con guida passo passo per ottenere una finitura simile alla pittura o alla serigrafia.
